[c-nsp] Fwd: GBIC_SECURITY_CRYPT-4-ID_MISMATCH: Identification check failed for GBIC in port [dec]

Dennis daodennis at gmail.com
Mon May 23 16:14:42 EDT 2011


I'm out of my element at this point - does anyone else have any suggestions?


---------- Forwarded message ----------
From: Farooq Razzaque <farooq_mcp at hotmail.com>
Date: Mon, May 23, 2011 at 1:05 PM
Subject: RE: [c-nsp] GBIC_SECURITY_CRYPT-4-ID_MISMATCH: Identification
check failed for GBIC in port [dec]
To: daodennis at gmail.com


Dear Dennis

I tried the following command but this command is not support. can u
please check again and let me know

service-unsupported transceiver










> Date: Mon, 23 May 2011 09:31:58 -0700
> Subject: Re: [c-nsp] GBIC_SECURITY_CRYPT-4-ID_MISMATCH: Identification check failed for GBIC in port [dec]
> From: daodennis at gmail.com
> To: farooq_mcp at hotmail.com
>
> On Mon, May 23, 2011 at 9:30 AM, Farooq Razzaque <farooq_mcp at hotmail.com> wrote:
> > Dear Dennis
> >
> > Is there need to upgrade the IOS ?
>
> I don't know for sure. Are you using Cisco SFPs? What IOS is it?
>
>
> >
> > service-unsupported transceiver
> >
> > Do i need to put the following commands as well or only the above command
> > will be sufficient.
>
> Just try the above if that doesn't work put in the below commands as well.
>
> >
> > no errdisable detect cause gbic-invalid
> >  errdisable recovery cause all
> >  errdisable recovery interval 30
> >
>
> Thanks,
>
> Dennis O.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >> Date: Mon, 23 May 2011 09:27:51 -0700
> >> Subject: Re: [c-nsp] GBIC_SECURITY_CRYPT-4-ID_MISMATCH: Identification
> >> check failed for GBIC in port [dec]
> >> From: daodennis at gmail.com
> >> To: farooq_mcp at hotmail.com
> >>
> >> On Mon, May 23, 2011 at 9:26 AM, Farooq Razzaque <farooq_mcp at hotmail.com>
> >> wrote:
> >> > Dear Dannis
> >> >
> >> > Thanks for your reply
> >> >
> >> > Is there any need to upgrade the IOS ?
> >> >
> >> > Are the following commands will be put on the GBIC interface
> >>
> >> Just do it in global config mode.
> >



More information about the cisco-nsp mailing list