[c-nsp] Cisco IGX

[Mohammad Khalil]

try also to activate the card (up the card) from the command line

From: ravi at swift-online.com
To: eng_mssk at hotmail.com
CC: cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] Cisco IGX
Date: Wed, 25 May 2011 16:35:56 +0530



Yes, I tried to pull out the cards and reinsert, replace. Unfortunately, no luck. From: Mohammad Khalil [mailto:eng_mssk at hotmail.com] 
Sent: Wednesday, May 25, 2011 3:15 PM
To: ravi at swift-online.com
Subject: RE: [c-nsp] Cisco IGX Man did u try to pull out the cards and insert again ?
did u try to swap ? do u have free slots ?

> From: ravi at swift-online.com
> To: cisco-nsp at puck.nether.net
> Date: Wed, 25 May 2011 02:31:38 +0530
> Subject: [c-nsp] Cisco IGX
> 
> Hi,
> 
> 
> 
> I have been using a cisco IGX 8430 since last 6 years.
> 
> 
> 
> Recently the trunk line on a NTM card went down and thereafter whatever I
> did, it would not come back up. In the end I thought that a reboot might fix
> the problem, but once rebooted, it now does not recognize any of the other
> cards as well. It keeps showing either the front cards or the back cards or
> both are missing on all the slots except the NPM slots.
> 
> 
> 
> Would appreciate if to know if anybody faced a similar problem and any
> possible fix to this.
> 
> 
> 
> Regards
> 
> Ravi
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/