[c-nsp] FWSM 6500 SVI intervlan routing

[Chris Evans]

Do you have nat 0 statements on the configuration?
On May 30, 2011 6:11 AM, "Muhammad Asif Rao" <masif.rao at gmail.com> wrote:
> Dear Folks,
>
> I'm getting problem for intervlan connectivity over fwsm, 3 vlans being
> linked to fwsm 10(dmz1/50),20(dmz2/20) & 30(outside). Intervlan routing
> required b/w 10 & 20 vlan while svi 30 vlan(outside) is p2p connectivity
b/w
> fwsm & msfc.
> access list applied on each interface allowing ip any extended traffic.
> routes for vlan 20 & 10 also added on msfc/switch, pointing to fwsm
outside
> interface. But traffic is not getting through. Though from fwsm i am able
to
> reach vlan hosts and msfc as well properly. Can anybody point if something
> missed in this scenario?
>
> I would really appreciate urgent replay.
>
>
> Thanks,
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/