[c-nsp] Cisco AnyConnect VPN Client

[Thomason, Simon]

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/data_sheet_c78-527494.html

VPN Protocol Choice SSL (TLS and DTLS), and IPsec/IKEv2
 New in AnyConnect 3.0

* AnyConnect now provides a choice of VPN protocols, allowing administrators to use whichever protocol best fits their business needs
* Tunneling support includes SSL (TLS and DTLS) and next-generation IPsec (IKEv2)
* DTLS provides an optimized connection for latency-sensitive traffic, such as VoIP traffic or TCP-based application access
* TLS (HTTP over TLS/SSL) ensures availability of network connectivity through locked-down environments, including those using web proxy servers
* IPsec/IKEv2 provides an optimized connection for latency-sensitive traffic when security policies require use of IPsec


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Manu Chao
Sent: Friday, 4 November 2011 2:24 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Cisco AnyConnect VPN Client

I haven't found how to configure IPSec with Cisco AnyConnect VPN Client.

Is it possible?
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


Show Your RACQ Card & Save during November and save 20% at Repco. For more info visit: www.racq.com/repco

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited.  RACQ does not warrant or represent that this email is free from viruses or defects.  If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.