[c-nsp] Interface is down (adminCfgChange) in N5K

[Erlend Røsok]

I'm pretty sure the peer link was up when i configured this. I tried shut/no shut now, and it removed adminCfgChange but now it's in Administratively shutdown.

I'd like to note that this happened on two ports now, i tried to move them after this occurred, but the result was the same. 

I could get a TAC case on this, but i would like to exhaust any other options first.

Here is the output you wanted.

server-sw5(config-sync)# show system internal mts buffers details
Node/Sap/queue  Age(ms)         SrcNode         SrcSAP  DstNode         DstSAP  OPC     MsgId   MsgSize
sup/284/pers    407839          0x101           24170   0x101           284     86017   165036834       868
sup/284/pers    8640            0x101           23943   0x101           284     86017   165111292       868
sup/284/pers    597             0x101           24168   0x101           284     86017   165117208       868
sup/284/pers    339             0x101           24157   0x101           284     86017   165117243       868
sup/284/pers    160             0x101           24156   0x101           284     86017   165117265       868
sup/284/pers    60              0x101           23939   0x101           284     86017   165117267       868
sup/284/pers    50              0x101           23904   0x101           284     86017   165117273       868
sup/284/pers    31              0x101           14898   0x101           284     86017   165117284       868


Best Regards
--
Erlend Røsok


----- Original Message -----
Fra: "John Gill" <johgill at cisco.com>
Til: erlendr at met.no
Kopi: cisco-nsp at puck.nether.net
Sendt: 4. november 2011 15:36:55
Emne: Re: [c-nsp]  Interface is down (adminCfgChange) in N5K

Erlend,
This is buggy behavior, you may be able to get the port back up with a 
shut/no shut.  I don't see an exact match in known bugs, but do you have 
the ability to file a TAC case?  If not, I can still help by gathering 
some debugs with you.

Were you doing this configuration while the peer-link was down or 
initializing?

Can you check the mts message queue?  show system internal mts buffers 
detail

Regards,
John Gill
cisco

On 11/4/11 7:07 AM, Erlend Røsok wrote:
>
> I'm trying to bring up two interfaces under config sync mode in a redundant N5K system running version 5.0(3)N2(2).
>
> The FEX modules have one uplink to each of the N5K.
>
>
> 1) I first try to configure using a port-profile.
>
> This brings it in Administratively down state for some reason. So i try to no shut the interfaces under config sync, but it does not take effect.
>
> 2) I then try to remove everything and configure it without a port-profile.
>
> This brings the interfaces in (adminCfgChange) state. I've tried to google this, but it hasn't given me much information.
>
>
> I have the configuration in a pastebin here: http://pastebin.mozilla.org/1373542
>
>
> Any help would be appreciated.
>
>
> Best Regards
>
> --
> Erlend Røsok
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>