[c-nsp] LNS av-pair vrf

Ghassan.khalil ghassan.khalil at gmail.com
Fri Nov 11 10:18:49 EST 2011


Thanks Oli Matthew and Daniel,
Oli what I meant with my last paragraph was that I though that all the configuration will be on the AAA side, and the creation of the new loopback interfaces was not in my calculations :). 
Anyway I will give it a try within a couple of days and give you a feedback guys.

Really thanks



On Nov 11, 2011, at 4:46 PM, "Oliver Boehmer (oboehmer)" <oboehmer at cisco.com> wrote:

> 
>> Thanks,
>> As it seems from all the feedbacks that we need to have a dedicated
> loopback
>> for each customer as this loopback is configured with the certain VRF.
>> By this I will need to configure more than 100 loopbacks :) is this
> the only
>> way ?
> 
> yes, as Daniel already mentioned. However you can assign the same IP
> address to all 100+ loopbacks and don't need to burn addresses..
> 
>> It will not be a big problem as I also need to add an av-pair to those
> 100
>> users from the AAA server as well.
> 
> not sure what you mean?
> 
>    oli
> 
> 



More information about the cisco-nsp mailing list