[c-nsp] show installed memory and usage

["Rolf Hanßen"]

Hello list,

according what I read on a Sup720 I have:
-Switch processor DRAM
-Route processor DRAM
-Switch processor bootdisk
-Route processor bootdisk

I now want to find out what is installed and what is used (at least for
the DRAM).

with "dir" I get the SP bootdisk I think:
Directory of sup-bootdisk:/
...
512024576 bytes total (303824896 bytes free)

"sh version" gives me:
cisco CISCO7609-S (R7000) processor (revision 1.0) with 983008K/65536K
bytes of memory.

"sh mem" shows:
                Head    Total(b)     Used(b)     Free(b)   Lowest(b) 
Largest(b)
Processor   47352690   885676400   581839952   303836448    78906924  
302877164
      I/O    8000000    67108864    15793180    51315684    51315684   
51313980

Are those values the RP memory or the SP memory ?
How can I find out the values for the other memory not shown here?

How do I see the memory installed in 2nd sup720 (in case it is not in a
mode which requires same sizes as active card) ? attach the slot and "sh
mem" ?

kind regards
Rolf Hanßen