[c-nsp] IOS XR Path Computation Element

[Vitkovsky, Adam]

Hi there,
I'd like to ask how to configure the inter-as-te on XR
I've found that XR uses Path Computation Element rather than passive interface flooding that is used in IOS

ASBR-1:

  configure
   mpls traffic-eng

    interface pos 0/6/0/0
     pce address ipv4 192.168.25.66 <-------- is this suppose to be ASBR-1 loopback ip please?
     pce peer address ipv4 10.1.1.1 <-------- is this suppose to be remote AS ASBR or local AS PE please?
     pce keepalive 10
     pce deadtimer 50
     router id loopback 0
     router ospf 1
     router-id 192.168.25.66 <-------- is this suppose to be ASBR-1 loopback ip please?
     area 0

    interface loopback 0
    mpls traffic-eng router-id loopback 0
    mpls traffic-eng area 0

   rsvp
    interface pos 0/6/0/0
     bandwidth 100
    commit

And the tunnel-te destination should be remote-as PE like in IOS right?
And the path option should use the "pce" keyword

Thank you very much



Adam Vitkovsky CCIP(r) CCNP(r) certified
System Engineer | AT&T Business Solutions - Global Customer Service
Phone: +421-269-257-375
Email: av0025 at att.com<mailto:av0025 at att.com>

"This message and any attachments to it contain confidential business information intended solely for the recipients. If you have received this email in error please do not forward or distribute it to anyone else, but email me to report the error, and then delete this message from your system."