[c-nsp] No Link between SFP-10G-LRM and X2-10GB-LX4?

Chuck Church chuckchurch at gmail.com
Wed Oct 5 14:36:07 EDT 2011


I believe LX4 uses multiple wavelengths.  This seems to confirm it.  I don't
think you can mix those with anything else.

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6574/product_dat
a_sheet0900aecd801f92aa.html


Thanks,

Chuck


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of cisco at entrap.de
Sent: Wednesday, October 05, 2011 1:41 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] No Link between SFP-10G-LRM and X2-10GB-LX4?

Greetings,

I have a 6509 with an X6716-10GE Card equipped with Cisco X2-10GB-LX4 10GE
modules and a Cisco 2960S-48TD-L Switch with two Cisco SFP-10G-LRM
modules.

Right now I am not able to get an active link between these X2 and SFP
modules, it stays down/down (notconnected). I instantly get a link when
connecting X2 to X2 or SFP+ to SFP+ Module. I tried nonegotiate but this
didn't help.. The 6509 runs IOS 12.2(33)SXI7, the 2960 IOS 12.2(55)SE3.
Cisco says these modules are compatible to each other..

Has anyone seen this before? Any hints or ideas?

Thanks,
Holger

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list