[c-nsp] No Link between SFP-10G-LRM and X2-10GB-LX4?

[Mack McBride]

Additionally depending on code version those (LRM and/or LX4) may not be supported on the 6509.
Much better to stick to standard transceivers (SR, LR, ER, ZR or DWDM).

Mack

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Gert Doering
Sent: Wednesday, October 05, 2011 12:27 PM
To: cisco at entrap.de
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] No Link between SFP-10G-LRM and X2-10GB-LX4?

Hi,

On Wed, Oct 05, 2011 at 07:40:30PM +0200, cisco at entrap.de wrote:
> I have a 6509 with an X6716-10GE Card equipped with Cisco X2-10GB-LX4 
> 10GE modules and a Cisco 2960S-48TD-L Switch with two Cisco 
> SFP-10G-LRM modules.

http://en.wikipedia.org/wiki/10_Gigabit_Ethernet#10GBASE-LX4

and no...

> Cisco says these modules are compatible to each other..

... LRM and LX4 are not compatible.

gert
--
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de