[c-nsp] 6rd on ASR1k

[Harold Ritter]

Ruslan,

Can you provide the BR config and the address you are trying to ping.

Regards


Le 11-10-07 04:40, « Ruslan Pustovoitov » <rus-p at mostelekom.net> a écrit :

>Hi all
>
>I try to setup 6rd on asr1k accordingly to
>http://docwiki.cisco.com/wiki/6rd_Configuration_Example
>Then I ping6 IPv6 host from client and see that IPv6 packet envelops in
>IPv4 with right IPv4 destination (6rd relay IPv4 address).
>This IPv4 packet seccessfully reach asr1k and nothing else. Packets
>silently disappear.
>
>The output of  "show tunnel 6rd tunnel 0Interface Tunnel0" dont show any
>counters info:
>  Tunnel Source: 192.88.99.127
>  6RD: Operational, V6 Prefix: 2YYY:ZZZZ:206::/48
>       V4 Prefix, Length: 16, Value: 192.88.0.0
>       V4 Suffix, Length: 0, Value: 0.0.0.0
>  General Prefix: 2YYY:ZZZZ:206:637F::/64
>
>
>Also, I don't see any IPv6 packet going from asr1k to IPv6 directly
>connected host where I run tcpdump.
>Client seccessfully pinging 6rd relay 192.88.99.127
>
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/