[c-nsp] Per VLAN Bandwidth Shaping on Cisco 2960

[Alex Pressé]

If all you want is to do basic traffic policing, you could set up an
aggregate policer and assign this to all port members of your Vlan.
2960 can only do ingress policing (not shaping, or egress shaping/policing)
per port.

2011/10/7 Tóth András <diosbejgli at gmail.com>

> Hi Righa,
>
> Vlan-based QoS is not supported on Catalyst 2960 switches.
>
> Best regards,
> Andras
>
>
> On Fri, Oct 7, 2011 at 7:08 PM, Righa Shake <righa.shake at gmail.com> wrote:
> > Hi,
> >
> > Am looking at bandwidth shaping per VLAN on a 2960 Cisco Switch as
> opposed
> > to doing it per port.
> >
> > Regards,
> > Righa Shake
>

-- 
Alex Presse
"How much net work could a network work if a network could net work?"