[c-nsp] EoMPLS ?s

[James Jones]

I like my frames jumbo sized!!!!!

On Wed, Oct 12, 2011 at 4:46 PM, Gert Doering <gert at greenie.muc.de> wrote:

> Hi,
>
> On Wed, Oct 12, 2011 at 02:52:34PM -0400, Jason LeBlanc wrote:
> > We're considering using EoMPLS port mode to bridge two datacenters
> > together temporarily for a move using sup720-3BXL on both ends with 6724
> > blades, probably 2 or 4 gig links, possibly 10g if I can get them to buy
> > the HW.  The question I have primarily is with regard to MTU.  I have
> > heard there are issues with ensuring both sides match, not much concern
> > there.  But the network between the two facilities may be lower than the
> > 1518 bytes, causing fragmentation.  I know this gets punted to the RP,
> > and is going to be a problem.  Is there any work around?
>
> "Use links with a higher MTU".
>
> gert
> --
> USENET is *not* the non-clickable part of WWW!
>                                                           //
> www.muc.de/~gert/
> Gert Doering - Munich, Germany
> gert at greenie.muc.de
> fax: +49-89-35655025
> gert at net.informatik.tu-muenchen.de
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>