[c-nsp] Cisco CSS to Log URLs

[Arie Vayner (avayner)]

You could try these:
logging subsystem flowmgr level debug-7
logging subsystem flowagent level debug-7

Be very careful with this, as it is a low-level debug mode, and would
most likely have substantial performance impact.

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Yahoo!
Sent: Monday, October 17, 2011 20:10
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Cisco CSS to Log URLs

Dear Experts,

We have CSS (Cisco load-balancers) and as you may know these boxes are
end of life and no longer supported by Cisco. My Question is how to get
URL logs out of this box. I have changed logging up to level 6 and still
cannot get URLs on my Splunk. I can't find the right logging command!

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/