[c-nsp] DMVPN Per Tunnel QoS Question
Jeff Cartier
Jeff.Cartier at pernod-ricard.com
Fri Oct 21 12:30:44 EDT 2011
Hi Group,
I just have a question regarding Per Tunnel QoS within a DMVPN... Specifically about the percent command within the CBWFQ child policy.
I know for Per Tunnel QoS it needs to be implemented in a hierichal policy. So I have a parent policy that shapes traffic to 1.5Mbps, then nested inside a child policy that let say gives a traffic class a percentage of 20. My question is where is it calculating the 20% from? The bandwidth statement on the tunnel interface? Or configuration from the parent policy because it's shaping traffic to 1.5MB?...so 20% of 1.5MB?
Just looking for some insight :)
__________________________________________________________________
DISCLAIMER: This e-mail contains proprietary information some or all of which may be legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail.
This message has been scanned for the presence of computer viruses, Spam, and Explicit Content.
More information about the cisco-nsp
mailing list