[c-nsp] 12000-SIP-601 and SPA-8X1G-v2

[Lee Starnes]

Thanks Oliver. We are needing to do Etherbundles (Etherchannel) between our
6509s and our 12410s. Wanted to make sure that this does not have any
hidden gotchas like not running XR unless you have a certain amount of ram
on the card before we buy buying a few. IPv6 support in 4.1.0 is good to
know.

Thanks for the information.

-Lee

On Sun, Oct 30, 2011 at 6:55 AM, Oliver Boehmer (oboehmer) <
oboehmer at cisco.com> wrote:

> Lee,
>
> > I was wondering if anyone knows of issues running the sip-601 with the
> > spa-8x1ge-v2 on 12410xr doing etherbundles? Are there any memory
> > requirements on the sip card? I understand that you can't do ipv6 in
> the
> > bundles, but other than this is there any reason this would or does
> not
> > work?
>
> It should work, and XR4.1.0 added v6 support for bundles (check
> http://www.cisco.com/en/US/docs/routers/xr12000/software/xr12k_r4.1/inte
> rfaces/configuration/guide/hc41lbun.html#wp1033144). I'm not aware of
> any memory restrictions for bundles, IIRC SIP601 comes with 2GB of route
> memory, which is plenty.
> Why do you ask?
>
>        oli
>