[c-nsp] Upgrading Sup2 to Sup720 - 6513

[Mounir Mohamed]

SUP/RSP720 requires high speed fan controllers and high capacity power
supplies, So check your existing configuration before perform the migration.

On Mon, Aug 29, 2011 at 7:32 AM, cisco group <bundaberg440ml at gmail.com>wrote:

> We have a 6513 in our network with 2x Catalyst 6000 Sup 2 engines
> running in SSO (Active, Standby Hot).  The supervisors are currently
> in slot 1 and 2.
>
> We would like to replace the supervisors with 2x WS-SUP720-3B in SSO
> mode.  These sups are required to be inserted into slots 7 and 8.
>
> I have looked around on the cisco site and have found procedures for
> upgrading IOS on redundant supervisors but am unable to find
> procedures on upgrading supervisor engines themselves?
>
> Can anyone point me in the right direction?
>
> Thank You
>
>
> Switch#show module
> Mod Ports Card Type                              Model
> Serial No.
> --- ----- -------------------------------------- ------------------
> -----------
>  1    2  Catalyst 6000 supervisor 2 (Hot)       WS-X6K-SUP2-2GE
>  2    2  Catalyst 6000 supervisor 2 (Active)    WS-X6K-SUP2-2GE
>
> Switch#show vers
> .......
> IOS (tm) c6sup2_rp Software (c6sup2_rp-JK9S-M), Version 12.2(18)SXD5,
> RELEASE SOFTWARE (fc3)
> ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)
> BOOTLDR: c6sup2_rp Software (c6sup2_rp-JK9S-M), Version 12.2(18)SXD5,
> RELEASE SOFTWARE (fc3)
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Best Regards,
Mounir Mohamed, CCIE No.19573 (R&S, SP)
Senior Network Engineer, Core Team.
NOOR Data Networks, SAE
Mobile# +2-010-2345-956
http://mounirmohamed.wordpress.com
http://www.linkedin.com/in/mounirmohamed