[c-nsp] Cisco 6500/SUP720-3B EtherChannel Sample ?

"Rolf Hanßen" nsp at rhanssen.de
Sun Sep 4 10:19:10 EDT 2011


Hi,

I just thought about how to add an interface to a running channel and I am
wondering about the config after adding a port.
If you have an existing channel and use "channel-group ..." on a clean
interface to add it the config of the physical interface is not extendet
with the config of the channel (for example the "switchport trunk allowed
vlan ..." line).
But If you change the config of the channel the config of the member ports
is updated automatically.

What happens if a have 2 ports in the channel with different allowed vlans ?
Is the physical interface config ignored (and the channel interface vlans
are valid on all members) or does this really work and a vlan only
configured on one port of the channel is handled like a vlan on a
non-channel port ?

kind regards
Rolf

> add command 'channel-group 5 mode on' to interface. This creates
> port-channel interface
> configuration below from one 7609 SUP720
>
> interface Port-channel5
>   description xxx link
>   switchport
>   switchport trunk encapsulation dot1q
>   switchport trunk allowed vlan
> 1-253,255-283,285-288,291-306,308-337,339-355
>   switchport trunk allowed vlan add
> 357-372,375,376,380-382,384-388,390-531
>   switchport trunk allowed vlan add
> 534-603,607-610,612-691,693-703,705-899
>   switchport trunk allowed vlan add 901-973,975-1156,1158-1207,1209-1252
>   switchport trunk allowed vlan add
> 1254-1268,1270,1271,1274-1276,1278-1296
>   switchport trunk allowed vlan add
> 1298-1356,1358-1383,1385-1422,1424-1513
>   switchport trunk allowed vlan add
> 1515-1524,1526-1604,1606,1608-1628,1630
>   switchport trunk allowed vlan add
> 1632-1968,1971-1979,1981-2099,2101-2204
>   switchport trunk allowed vlan add
> 2206-2899,2901-3472,3474,3476-3478,3480-4094
>   switchport mode trunk
>   switchport nonegotiate
>   mtu 2200
>   load-interval 30
>   mls qos trust cos
>
> interface TenGigabitEthernet7/1
>   description xxx portchannel 5
>   switchport
>   switchport trunk encapsulation dot1q
>   switchport trunk allowed vlan
> 1-253,255-283,285-288,291-306,308-337,339-355
>   switchport trunk allowed vlan add
> 357-372,375,376,380-382,384-388,390-531
>   switchport trunk allowed vlan add
> 534-603,607-610,612-691,693-703,705-899
>   switchport trunk allowed vlan add 901-973,975-1156,1158-1207,1209-1252
>   switchport trunk allowed vlan add
> 1254-1268,1270,1271,1274-1276,1278-1296
>   switchport trunk allowed vlan add
> 1298-1356,1358-1383,1385-1422,1424-1513
>   switchport trunk allowed vlan add
> 1515-1524,1526-1604,1606,1608-1628,1630
>   switchport trunk allowed vlan add
> 1632-1968,1971-1979,1981-2099,2101-2204
>   switchport trunk allowed vlan add
> 2206-2899,2901-3472,3474,3476-3478,3480-4094
>   switchport mode trunk
>   switchport nonegotiate
>   mtu 2200
>   load-interval 30
>   mls qos trust cos
>   channel-group 5 mode on
>
>
> interface TenGigabitEthernet7/3
>   description xxx portchannel 5
>   switchport
>   switchport trunk encapsulation dot1q
>   switchport trunk allowed vlan
> 1-253,255-283,285-288,291-306,308-337,339-355
>   switchport trunk allowed vlan add
> 357-372,375,376,380-382,384-388,390-531
>   switchport trunk allowed vlan add
> 534-603,607-610,612-691,693-703,705-899
>   switchport trunk allowed vlan add 901-973,975-1156,1158-1207,1209-1252
>   switchport trunk allowed vlan add
> 1254-1268,1270,1271,1274-1276,1278-1296
>   switchport trunk allowed vlan add
> 1298-1356,1358-1383,1385-1422,1424-1513
>   switchport trunk allowed vlan add
> 1515-1524,1526-1604,1606,1608-1628,1630
>   switchport trunk allowed vlan add
> 1632-1968,1971-1979,1981-2099,2101-2204
>   switchport trunk allowed vlan add
> 2206-2899,2901-3472,3474,3476-3478,3480-4094
>   switchport mode trunk
>   switchport nonegotiate
>   mtu 2200
>   load-interval 30
>   mls qos trust cos
>   channel-group 5 mode on
>
>
>
> site#sh etherchannel 5 detail
> Group state = L2
> Ports: 2   Maxports = 8
> Port-channels: 1 Max Port-channels = 1
> Protocol:    -
> Minimum Links: 0
>                  Ports in the group:
>                  -------------------
> Port: Te7/1
> ------------
>
> Port state    = Up Mstr In-Bndl
> Channel group = 5           Mode = On               Gcchange = -
> Port-channel  = Po5         GC   =   -              Pseudo port-channel
> = Po5
> Port index    = 0           Load = 0x55             Protocol =    -
> Mode = LACP
>
> Age of the port in the current state: 160d:04h:22m:01s
>
> Port: Te7/3
> ------------
>
> Port state    = Up Mstr In-Bndl
> Channel group = 5           Mode = On               Gcchange = -
> Port-channel  = Po5         GC   =   -              Pseudo port-channel
> = Po5
> Port index    = 1           Load = 0xAA             Protocol =    -
> Mode = LACP
>
> Age of the port in the current state: 117d:23h:20m:43s
>
>                  Port-channels in the group:
>                  ----------------------
>
> Port-channel: Po5
> ------------
>
> Age of the Port-channel   = 167d:04h:04m:53s
> Logical slot/port   = 14/5          Number of ports = 2
> GC                  = 0x00000000      HotStandBy port = null
> Port state          = Port-channel Ag-Inuse
> Protocol            =    -
> Fast-switchover     = disabled
> Direct Load Swap    = disabled
>
> Ports in the Port-channel:
>
> Index   Load    Port      EC state        No of bits
> ------+------+--------+------------------+-----------
>    0     55     Te7/1      On                 4
>    1     AA     Te7/3      On                 4
>
> Time since last port bundled:    117d:23h:20m:48s    Te7/3
> Time since last port Un-bundled: 120d:20h:49m:00s    Te7/3
>
> Last applied Hash Distribution Algorithm: Fixed
> Channel-group Iedge Counts:
> --------------------------:
> Access ref count       : 0
> Iedge session count    : 0
>
> Den 8/28/2011 7:29 AM, skrev Olivier CALVANO:
>> Hi
>>
>> I request a small help:
>>
>> We have two cisco 6500 with SUP720-3B and 4 port 10G card.
>>
>> First C6500 are not on the same site of the second and we have two fiber
>> for the interconnect.
>>
>> Actually, only one fiber is used, we want connect the second for create
>> a
>> etherchannle (2x10GB) and for secure (don't lost the connection if one
>> of
>> the fiber
>> are cut).
>>
>> I am search a very basic config sample for this, the cisco are used only
>> in
>> switch with
>> vlan.
>>
>> Thanks for your help
>> Olivier
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>




More information about the cisco-nsp mailing list