[c-nsp] Cat 4500 series High CPU

[Terry Rupeni]

Thks will try these out.

-----Original Message-----
From: Mark Tinka [mailto:mtinka at globaltransit.net] 
Sent: Saturday, September 03, 2011 9:07 PM
To: cisco-nsp at puck.nether.net
Cc: Yann GAUTERON; rupeni_t at usp.ac.fj
Subject: Re: [c-nsp] Cat 4500 series High CPU

On Saturday, September 03, 2011 02:27:22 PM Yann GAUTERON
wrote:

> If you haven't done an "no ip redirects" on all your routed 
> interfaces, this could be an issue.

A very long time ago, a Dutch friend of mine once suggested to Cisco that
they add a command "no cisco bullshit" (or something along those lines) that
would do the following:

conf t
 no ip source-route
 ip cef
 ip subnet-zero
 !
 interface <blah>
  no ip redirects
  no ip unreachables (depends)
  no ip proxy-arp
  no cdp enable
  no mop enabled
 !
 no ip http server
 no ip http secure-server
 no cdp run
 ip classless
 ip bgp-community new-format

Obviously, it transpired that Cisco never implemented such a command :-).

Cheers,

Mark.