[c-nsp] Cisco 7206 overloading every four hours

[Joseph Mays]

> What are the npe/mem specs of this box, and how many bgp peers are you 
> getting partial or full routes from?

Only 1 peer for this box (at the moment). Show ver info below.

core-gw1.noc>show ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IK9SU2-M), Version 12.3(23), RELEASE SOFTWARE 
(fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 24-Jul-07 21:42 by stshen
Image text-base: 0x60008AF4, data-base: 0x61F54BE0

ROM: System Bootstrap, Version 12.2(1r) [dchih 1r], RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(24)S, EARLY DEPLOYMENT 
RELEASE SOFTWARE (fc1)

core-gw1.noc uptime is 37 weeks, 1 day, 8 hours, 11 minutes
System returned to ROM by power-on
System restarted at 05:39:25 EST Sun Jan 2 2011
System image file is "disk0:c7200-ik9su2-mz.123-23.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found 
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export at cisco.com.

cisco 7206VXR (NPE300) processor (revision D) with 262144K/32768K bytes of 
memory.
Processor board ID 20399590
R7000 CPU at 262MHz, Implementation 39, Rev 2.1, 256KB L2 Cache
6 slot VXR midplane, Version 2.0

Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.

--------------------------------------------------------------
This Version of Cisco IOS Software is not supported on NPE300.
Please select a version of Cisco IOS software compatible with
this processor from http://www.cisco.com.
--------------------------------------------------------------

PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has a capacity of 600 bandwidth 
points.
Current configuration on bus mb0_mb1 has a total of 200 bandwidth points.
This configuration is within the PCI bus capacity and is supported.

PCI bus mb2 (Slots 2, 4, 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 380 bandwidth points
This configuration is within the PCI bus capacity and is supported.

Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.


2 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
125K bytes of non-volatile configuration memory.

46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x102

core-gw1.noc>