[c-nsp] 7600 DC Power Supply Mix....

[Mack McBride]

You can mix and match but be aware of how the power supplies are utilized and how the cards shut down (highest numbered slot first).

Mack

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Howard Leadmon
Sent: Wednesday, September 21, 2011 7:39 PM
To: 'omar parihuana'; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 7600 DC Power Supply Mix....

   According to Cisco's docs on the 6500/7600 chassis, you can mix and match
supply wattages (as long as the supplies meet the minimum requirements of
the supervisor), and also mix AC and DC supplies.   Of course if you have a
mismatched pair running in a redundant configuration, then if the larger
supply fails you will only have the lower wattage of the smaller supply
available..


---
Howard Leadmon


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of omar parihuana
Sent: Wednesday, September 21, 2011 8:22 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 7600 DC Power Supply Mix....

Hi list...


Quick question... is it possible to use one power supply 2500W and other
4000W both DC in the same chassis 7609?

Rgds.


--
Omar E.P.T
-----------------
Certified Networking Professionals make better Connections!
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/