[c-nsp] IOS XR RPL

Arie Vayner (avayner) avayner at cisco.com
Thu Sep 22 07:18:17 EDT 2011


Nick,

I think you can find the following example very similar to what you want
to achieve:
http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.1/rout
ing/configuration/guide/routing_cg41asr9k_chapter7.html#ref_1093449

Arie 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Nick Ryce
Sent: Thursday, September 22, 2011 13:48
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] IOS XR RPL

Hi,

I'm trying to write a route-policy that will prepend a customers'
announcement when they send a certain community.  The prepend should be
their own AS number rather than our AS.

I know how to do this is Junos but could anyone point me in the right
direction for IOS XR?

Thanks

Nick

________________________________
--

This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they are
addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted. Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison.
Finally, the recipient should check this email and any attachments for
the presence of viruses. Lumison accept no liability for any damage
caused by any virus transmitted by this email.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list