[c-nsp] NPE-G1 Interface errors / packetloss
Artyom Viklenko
artem at aws-net.org.ua
Fri Sep 30 06:16:44 EDT 2011
29.09.2011 20:22, Alexander Fossa wrote:
>
> On the NPE-G1
>
> interface GigabitEthernet0/1
> description Link to BabyBoy1/1
> mtu 9216
> no ip address
> duplex full
^^^^^^^^^^^^^^^
> speed 1000
^^^^^^^^^^^^^^^
> media-type rj45
> no negotiation auto
> no cdp enable
> hold-queue 1500 in
> end
>
> From the SUP32
>
> interface GigabitEthernet1/7
> description DSL1.THE_GI0/1
> switchport
> switchport trunk encapsulation dot1q
> switchport trunk allowed vlan 89
> switchport mode trunk
> mtu 9216
> no cdp enable
> no mop enabled
> no mop sysid
> end
Try to set speed and duplex on both sides the same way.
--
Sincerely yours,
Artyom Viklenko.
-------------------------------------------------------
artem at aws-net.org.ua | http://www.aws-net.org.ua/~artem
artem at viklenko.net | JID: artem at jabber.aws-net.org.ua
FreeBSD: The Power to Serve - http://www.freebsd.org
More information about the cisco-nsp
mailing list