[c-nsp] switch with 2x 10GBASE-T interfaces

[Martin T]

Alan, Arne:

WS-C3750X-24S-E + C3KX-NM-10GT seems to be a perfect solution!

WS-C3750X-24S-E has 24 SFP ports so one could use 12 1000BASE-T SFP's
+ 2 1000BASTE-LX10 SFP's and C3KX-NM-10GT module provides two
10GBASE-T ports so all the requirements seems to be fulfilled.


Jim,
I'm afraid WS-C4928-10GE would not suite because two 10GBASE-T ports
are must-have. If there would be 10GBASE-T X2 modules available, this
switch would be a nice option.


Kevin,
if possible, I would prefer Cisco.



What do you think about "WS-C3750X-24S-E + C3KX-NM-10GT" solution? In
addition, are there 10GBASE-T SFP+ modules available on the
market(Cisco or third-party)?


regards,
martin


2011/9/30 Kevin Loch <kloch at kl.net>:
> Martin T wrote:
>>
>> Is there a Cisco switch(non-modular preferably) which fulfils those
>> requirements:
>>
>> 1) 12 or more 1000BASE-T ports
>> 2) 2x SFP port for 1000BASE-LX10 SFP's
>> 3) 2x 10GBASE-T ports(for IBM 10Gb iSCSI Host Interface Card 81Y9613,
>> which has two 10GBASE-T interfaces)
>
> It's not Cisco but Dell 6248 does have a 2 port 10Gbase-T module
> option.  The onboard SFP ports will accept any generic 1G SFP's
> (for your LX10 optics).
>
> - Kevin
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>