[c-nsp] OSPFv3 in a VRF on a 7600

[Łukasz Bromirski]

On 2012-04-10 12:47, Benny Amorsen wrote:
> Is it possible to run OSPFv3 in a VRF on a 7600? I cannot for the life
> of me figure it out from the documentation, and the obvious commands
> like "ipv6 router ospf 123 vrf whatever" do not work at least on SRC4.

Actually, it should work with the just released 15.2(2)S image.

Unfortunately, the configuration guide is not yet linked in, just
a command reference:

http://www.cisco.com/en/US/docs/ios/15_2s/release/notes/15_2s_feats_important_notes_15_2_2s.html

-- 
"There's no sense in being precise when |               Łukasz Bromirski
  you don't know what you're talking     |      jid:lbromirski at jabber.org
  about."               John von Neumann |    http://lukasz.bromirski.net