[c-nsp] MQC and PA-A6

[Brian Turnbow]

Hi

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Marco Marzetti
> Sent: lunedì 16 aprile 2012 16:13
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] MQC and PA-A6
> 
> Hello,
> 
> Simple and plain question: does MQC work in hardware when attached to
> ATM VP||PVC on c7200+PA-A6 ?
> 

Simple answer No

Longer answer , it does have a "SAR" that does ATM shaping ( i.e vbr abr etc) in hardware , but all the ip stuff will be done on the router cpu.


Ciao 

Brian

> Thank You
> 
> Regards
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


---
This e-mail is intended only for the addressee named above. 
As this e-mail may contain confidential or privileged information, 
if you are not the named addressee, you are not authorized to retain, read, 
copy or disseminate this message or any part of it.   
 
Please consider your environmental responsibility before printing this e-mail.