[c-nsp] L3VPN works, but not default route

[Luis Anzola]

Hi,

You need to configure the following command in order to propagate the 
default route to the remote PEs:

router bgp <ASN>
  !
  address-family ipv4 vrf <vrf-name>
*  default-information originate*

Regards.

On 17/04/2012 19:06, aaron1 at gvtc.com wrote:
> I'm not able to send the default route across a mpls L3VPN
>
> On a ce router I'm doing defaul info-orig and a directly connected PE rcvs it in it's vrf specific rib
>
> So, again, i see the default route learned via ospf on ce-pe advertisements in the pe vrf on one side of the cloud....then i redis ospf into mp-ibgp and i see all of my ospf routes (about 490 routes total) advertised over the mpls core to the other pe on the other side of the cloud .... the only route that doesn't make it over is 0/0
>
> Any ideas?
>
> Aaron
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/