[c-nsp] remove spanning-tree without being service effecting

[Chuck Church]

Figure out all the commands you need to enter for everything, put it in a
text file, and tftp that into the running config.  Obviously test it well
before hand, and schedule a reload on the device just as a backup.

Chuck

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of James Urwiller
Sent: Thursday, August 02, 2012 10:35 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] remove spanning-tree without being service effecting

I have a MSTP ring that I want to remove spanning-tree all together, and
manually shut down my "dead" link.  How can I remove or disable
spanning-tree without driving to each site?  If I use the commands
"spanning-tree bpdufilter" or "spanning-tree bpduguard"  they both
err-disable the port; which would cause my connectivity to the switch to go
down.  I also use the command "spanning-tree portfast trunk"  if I do that
command first before the bpduguard/filters will it not err-disable the
port??  

 

Is there a better way to go about this?? 

 

James Urwiller

Lead Internet Services Technician / Network Engineer

CCNA 11567125

American Broadband

402-426-6257 - Office

402-278-1875 - Cell

402-426-6273 - Fax

jurwiller at americanbb.com <mailto:mjurwiller at americanbb.com> 

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/