[c-nsp] (no subject)

[Engelhard M. Labiro]

What line cards are inserted ? Do you have enough power ?

On Tue, Aug 14, 2012 at 5:35 PM, Harry Hambi <harry.hambi at bbc.co.uk> wrote:

> Hi All,
> I have the following global command, diagnostic level complete. Is this
> command doing some sort of Diag on the line cards?. Also the output of
> the sh mod command is as follows:
>
>
> Mod Online Diag Status
> --- -------------------
>   1 Bypass
>   2 Bypass
>   3 Bypass
>   4 Bypass
>   5 Bypass
>   6 Bypass
>   7 Bypass
>   8 Bypass
>   9 Pass
>  10 Bypass
>  11 Bypass
>
> Why am I getting Bypass on a majority of line cards?, and only pass on
> mod 9?.Any info appreciated.
>
> Rgds
> Harry
>
> Harry Hambi BEng(Hons)  MIET  Rsgb
>
>
> http://www.bbc.co.uk/
> This e-mail (and any attachments) is confidential and may contain personal
> views which are not the views of the BBC unless specifically stated.
> If you have received it in error, please delete it from your system.
> Do not use, copy or disclose the information in any way nor act in
> reliance on it and notify the sender immediately.
> Please note that the BBC monitors e-mails sent or received.
> Further communication will signify your consent to this.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>