[c-nsp] SFP high power alarm

[Patrick Cole]

Marc,

Perhaps it was right on the limit of max receive threshold and they
repaired a splice that was dodgy to start with increasing the signal.

Patrick


Tue, Aug 21, 2012 at 11:13:48AM +0100, marc williams wrote:


> 10 GIG cisco compatible SFP in a 3750-X switch.
> we started to see this error message after a fibre break and repair:
> 
> %SFF8472-5-THRESHOLD_VIOLATION: Te4/1/2: Tx power high alarm;  
> Operating value:   0.6 dBm, Threshold value:   0.0 dBm
> 
> Cant see how the TX power can go high? any ideas? Interface is up and  
> working ok.
> 
> --
> Marc
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>