[c-nsp] traceroute shows mpls labels...how?

Chris Evans chrisccnpspam2 at gmail.com
Wed Aug 22 16:58:09 EDT 2012

Ahh good.  I can't exactly remember what I ran into.  Thx for clearing that
On Aug 22, 2012 3:56 PM, <sthaug at nethelp.no> wrote:

> > Also this depends on vendor too.  IIRC junos uses udp for its trace
> routing
> > and ios uses icmp.    Meaning that if you did traceroute from a cisco box
> > going over a juniper network the labels wouldn't show and vice
> > versa.
> Works just fine, labels are shown, both ways in our mixed Cisco - Juniper
> network.
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no

More information about the cisco-nsp mailing list