[c-nsp] Port Errors

Harry Hambi harry.hambi at bbc.co.uk
Tue Aug 28 05:16:32 EDT 2012


Hi All,
I have a module (16 SFM-capable 16 port 10/100/1000mb RJ45) in a 6500
chasis running IOS Version 12.1(23), giving the following errors  

Aug 26 06:41:48.965: %PM_SCP-SP-6-LCP_FW_ERR_INFORM: Module 9 is
experiencing t
e following error: Pinnacle #0, Frames with Bad Packet CRC Error
(PI_CI_S_PKTCR
_ERR - 0xC7) = 1100
Aug 26 09:11:49.090: %PM_SCP-SP-6-LCP_FW_ERR_INFORM: Module 9 is
experiencing t
e following error: Pinnacle #0, Frames with Bad Packet CRC Error
(PI_CI_S_PKTCR
_ERR - 0xC7) = 983

I recently swapped out this module, the errors cleared for a while but
have now started again. Any ideas appreciated.

Rgds
Harry

Harry Hambi BEng(Hons)  MIET  Rsgb


http://www.bbc.co.uk/
This e-mail (and any attachments) is confidential and may contain personal views which are not the views of the BBC unless specifically stated.
If you have received it in error, please delete it from your system.
Do not use, copy or disclose the information in any way nor act in reliance on it and notify the sender immediately.
Please note that the BBC monitors e-mails sent or received.
Further communication will signify your consent to this.
					


More information about the cisco-nsp mailing list