[c-nsp] SUSPECT: Powering down Linecards

Peter Rathlev peter at rathlev.dk
Thu Aug 30 08:01:01 EDT 2012

On Thu, 2012-08-30 at 12:37 +0100, Harry Hambi wrote:
> Sorry if this is a simple question, I have a 6513 running IOS Version
> 12.1(23)E is there a CLI command to power down individual linecards
> before replacing/reseating?.

What Nick wrote. And beware that the bus stall risk is there even if the
line card is powered off, so make sure to remove and insert it swiftly
for at least the closest few centimeters to the backplane.


More information about the cisco-nsp mailing list