[c-nsp] 7200 Line protocol bouncing

Michael Malitsky malitsky at netabn.com
Thu Aug 30 19:07:00 EDT 2012

The DS3 controller itself is set to "clock source line".  T1 channels on
it are not explicitly configured, but think their clock sources are


The single T1s are configured to use internal clock.  (remote are set to
recover clock from line).


This configuration has not changed in 3+ years. 



Michael Malitsky


From: N. Max Pierson [mailto:nmaxpierson at gmail.com] 
Sent: Thursday, August 30, 2012 5:47 PM
To: Michael Malitsky
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 7200 Line protocol bouncing


How do you have your timing setup WRT all circuits coming off of that




More information about the cisco-nsp mailing list