[c-nsp] IPv6 QOS Remarking Issue

[Xu Hu]

Hi Folks,
Below is my IPv6 configurations about MQC:

ipv6 access-list FTPV6
 permit tcp any any eq ftp
class-map match-all FTPV6
 match access-group name FTPV6
policy-map test
 class FTPV6
  set dscp cs7

interface TenGigabitEthernet9/1
 ip address 2.2.2.254 255.255.255.0
 load-interval 30
 ipv6 address 2002::254/64
 service-policy input test

STC-----7609------STC

Sending the traffic from STC port 1/1 to ten9/1 in 7609 ES+ 20G line card,
receiving traffic in STC port 1/2 through interface ten 9/1 in 7609 ES-20G
line card.
Traffic sent from STC is TCP traffic.

Now the issue is IPv6 traffic cannot match through checking command "show
policy-map inter ten 9/1", even the class-default also don't have.

Do i miss any configurations, or miss understanding anything?

Will appreciate for any inputs.

Thanks and regards,
Hu Xu