[c-nsp] ASA5510 in transparent with multiple subnets

[Rano Karno]

Hi Lee,

You can configure multiple bridge-group to accomodate additional network in ASA 5500.
please refer to http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/interface_complete_transparent.html#wp1321196


regards,
Rano


________________________________
 From: Ge Moua <moua0100 at umn.edu>
To: cisco-nsp at puck.nether.net 
Sent: Saturday, 1 December 2012, 23:24
Subject: Re: [c-nsp] ASA5510 in transparent with multiple subnets
 
You should be able to do transparent mode, multiple interfaces.

--
Regards,
Ge Moua
moua0100 at umn.edu

Univ of Minn Alumnus
--

On 11/30/12 5:33 PM, Lee Starnes wrote:
> Hello everyone,
>
> I was looking through documentation for the ASA5510 as we have a client who
> is running one in transparent mode. They need to add an additional IP block
> to their network and from what I am able to gather, it looks like you can
> not add a second /28 to their network configuration. Am I reading this
> correctly?
>
> Thanks,
>
> -Lee
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/