[c-nsp] OSPFv3 Adjacency issues between 2921 and 3750

[Gabor Ivanszky]

Hi Peter,

I've seen the same phenomenon on 12.2(50)SE3.
After upgrading to 12.2(55)SE6, OSPFv3 started to work(adjacency
FULL-FULL and stable)
However ping to ff02::5 still doesn't work.

regards,
Gabor

On Tue, Jul 3, 2012 at 1:01 PM, Peter Subnovic
<cnspmail002 at googlemail.com> wrote:
> Hi Peter,
>
> thank you for your suggestion. Unfortunately QoS is disabled on the 3750.
>
> 3750#show mls qos
> QoS is disabled
> QoS ip packet dscp rewrite is enabled
>
> 3750#show mls qos interface g1/0/24
> GigabitEthernet1/0/24
> QoS is disabled.
>
> Kind regards,
> Peter
>
> On Tue, Jul 3, 2012 at 1:49 PM, Peter Rathlev <peter at rathlev.dk> wrote:
>
>> On Tue, 2012-07-03 at 05:43 -0400, Chuck Church wrote:
>> > Long shot, but don't the 3750s have a certain SDM they need enabled to
>> use
>> > IPv6?
>>
>> And on that note, what about MLS QoS on the 3750? I seem to recall
>> having debugged something that turned out to be much (all?) IPv6 traffic
>> ending up in queue 3 or 4, and we have set buffer sizes for these to 0.
>> Does "no mls qos" make any difference? (If it's enabled of course.)
>>
>> --
>> Peter
>>
>>
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/