[c-nsp] Making SUP720 cope better under BGP load

[Tóth András]

Adrian,

Inband channel (link to CPU) is a 1GE full-duplex link in both Sup720 and
Sup2T.

Best regards,
Andras


On Sun, Dec 9, 2012 at 10:25 AM, Adrian Minta <adrian.minta at gmail.com>wrote:

> On 12/09/12 07:10, Andrew Jones wrote:
>
>> Sup720 cpu is around 600mhz if i remember correctly, whilst sup2t is 1.5
>> ghz dual core, so one would sup2t would handle this much better. Also,
>> sup2t has much better CoPP capability with built in default config
>> templates, ready for you to tune if needed.
>>
>>
>>  The CPU network interface is still 10mbps half duplex ?
>
> --
> Best regards,
> Adrian Minta
>
>
>
> ______________________________**_________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp>
> archive at http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/>
>