[c-nsp] Moving Routing from 7206VRX to 6509-E

[Gert Doering]

Hi,

On Wed, Dec 12, 2012 at 08:41:51AM -0600, An Nguyen wrote:
> One question I have been pondering on is how to configure the DFC4 cards so that routing/switching traffic for VLANs on the chassis doesn't go through the Supervisor Engine 2T.

"put 'em in"

I don't think there is a way you tell DFCs to be inactive.

(But if you're replacing a 7200 with that, this question is somewhat
moot, as the Sup2T alone has 500+ times the packet forwarding capacity
of the 7200...)

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20121212/91b9ac14/attachment.sig>