[c-nsp] me3600x - g0/25 ?!

[Aaron]

Doesn't seem to get rid of it.  Here's what I just now did...

- Rebooted.....still there.
- Tried to conf t....no int g0/25....got message that I can't remove
hardware int
- Downloaded nvram:startup-config....removed g0/25 from ascii
file....uploaded startup-config to nvram...verified g0/25 wasn't in
there....reloaded....guess what, g0/25 is not in startup config even after
reload, but g0/25 is in running config.  Also... conf t, int g0/?  Shows
options 1-25

Funny and weird

Aaron

-----Original Message-----
From: Christian Meutes [mailto:christian at errxtx.net] 
Sent: Wednesday, December 19, 2012 7:39 PM
To: Aaron
Cc: <cisco-nsp at puck.nether.net>
Subject: Re: [c-nsp] me3600x - g0/25 ?!

Happens when you insert SFPs in the SFP+ interfaces. Only way to get rid of
them is a reboot.

--
   Christian

On 20.12.2012, at 03:29, "Aaron" <aaron1 at gvtc.com> wrote:

> Any idea why I see an interface g0/25 on my me3600x?  this may be 
> following the ios upgrade to 15.3(1)S
> 
> 
> 
> There are only 24 physical sfp interfaces on this box
> 
> 
> 
> Aaron
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/