[c-nsp] MPLS TE

[Iftekhar Ahmad khan]

Hi, need to create protection tunnel that will protect the link or node
whichever is required.
On Dec 20, 2012 7:02 PM, "Jefri Abdullah" <me at jefri.info> wrote:

> On 2012-12-20 05:05 PM, M K wrote:
>
>
>  Now , the explicit path is working fine , when I shutdown one of the
>> links across the MPLS backbone , the tunnel interfaces become up again
>> due to the dynamic path configured under the tunnel interface
>> Now , when I remove the dynamic and configure FRR instead , the tunnel
>> interface keep in the down state (it's line protocol)
>> tunnel mpls traffic-eng fast-reroute bw-protect
>>
>> Am i missing something ?
>>
>
>
> You need to configure backup tunnel to protect the link first.
>
> --
>
> Regards,
>
> Jefri Abdullah
>
>
> Links:
> ------
> [1] https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp>
> [2] http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/>
> ______________________________**_________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp>
> archive at http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/>
>