[c-nsp] Issues with MTI on multicast VPN (ME3600) Waris help ; )

[Reuben Farrelly]

Hi Daniel

On 21/12/2012 8:26 PM, daniel.dib at reaper.nu wrote:
> Hi,
>
> I'm trying to setup Multicast VPN (MVPN) on a Cisco ME3600. It's a
> ME-3600X-24FS-M and the software is
> me360x-universalk9-mz.151-2.EY1a.bin. There seems to be an issue with
> the MTI. I only see packets outbound but no packets coming in. This is
> the configuration used, I had to remove some information that can't be
> displayed publically.

http://www.cisco.com/en/US/docs/ios-xml/ios/ipmulti_mvpn/configuration/15-2s/imc_cfg_mc_vpn.html

The feature was new in 15.2(2)S.  Your -EY release is older than this 
(it pre-dates even 15.2(1)S), so what you are doing is probably 
technically unsupported.

Is there any reason you haven't tried code that is a bit more recent, 
such as 15.2(4)S2 (or 15.3(1)S if you're really brave) though?

Reuben