[c-nsp] spanning tree on me3600x

[Aaron]

I don't see any instances of spanning tree running for various efp's I've
created in my ME3600.

 

Is there something different with spanning tree and the Me3600x that is much
different than older cisco switches ?

 

voice-3600#sh spanning-tree interface g0/4 efp 336

no spanning tree info available for GigabitEthernet0/4

 

voice-3600#sh run | in span

spanning-tree mode rapid-pvst

spanning-tree extend system-id

spanning-tree vlan 336 priority 24576

 

voice-3600#sh spann vl 336

Spanning tree instance(s) for vlan 336 does not exist.

 

voice-3600#sh run in g0/4

 

interface GigabitEthernet0/4

description ring 3 - 3y6 vlans

switchport trunk allowed vlan none

switchport mode trunk

load-interval 30

service instance 316 ethernet

  encapsulation dot1q 316

  rewrite ingress tag pop 1 symmetric

  bridge-domain 316

!

service instance 336 ethernet

  encapsulation dot1q 336

  rewrite ingress tag pop 1 symmetric

  l2protocol peer stp

  bridge-domain 336

!

End