[c-nsp] inter-VRF routing

[Jeff Kell]

import/export require BGP to actually work... or at least I've never had any success w/o
at least defining the BGP process.

Jeff

On 2/3/2012 9:22 AM, harbor235 wrote:
> Take a look into importing routes from one vrf into another using an import
> map.
>
> check out a previous thread:
>
> http://puck.nether.net/pipermail/cisco-nsp/2005-November/025500.html
> https://supportforums.cisco.com/thread/2097252
>
> Mike
>
> On Fri, Feb 3, 2012 at 9:00 AM, Covalciuc Piotr <pkovalchuc at gmail.com>wrote:
>
>> Hello,
>>
>> I've created multiple VRFs on Cisco 4510. I need to configure the routing
>> between VRFs. Cisco recommends using BGP and 'route-target import/export'.
>>
>> But, my IOS version don't support BGP.
>>
>> Is it possible to configure the inter-VRF routing using static routes? Or
>> maybe there are others solutions?
>>
>> Thank you,
>> Peter
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/