[c-nsp] VSS fast-hello link

Ramesh Karki rameshkarki at gmail.com
Sat Feb 4 00:31:15 EST 2012


we use a direct connection between the two chassis and i think it should be
back to back.

-ramesh

On Fri, Feb 3, 2012 at 12:40 PM, selamat pagi <ketimun at gmail.com> wrote:

> Would like to verify the physical fast-hello setup of my VSS-cluster
> (with SW1 and SW2):
>
>  SW1   ---    Vlan z        ---   SW4
>    ¦                                         ¦
> Vlan z                                 Vlan z
>    ¦                                         ¦
> SW1   ---     VSL link        ---   SW2
>          ---     VSL link        ---
>
> I am aware that fast-hello on SW1 and SW2 needs to be a dedicated port.
>
> But need these 2 dedicated ports be connected physically back-to-back OR
> can I span it with a vlan accros other switches ?
>
> many thanks,
>  keti
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list