[c-nsp] Quick 6500 question...

Bill Wade billwade98 at yahoo.com
Tue Feb 7 12:38:55 EST 2012


Also the 6513E backplane provides 80Gb (dual fabric channels) for each slot whereas the 6513 is limited to 40Gb in slots 1-8.




________________________________
 From: Phil Mayers <p.mayers at imperial.ac.uk>
To: cisco-nsp at puck.nether.net 
Sent: Tuesday, February 7, 2012 12:19 PM
Subject: Re: [c-nsp] Quick 6500 question...
 
On 07/02/12 15:30, Justin M. Streiner wrote:
> On Tue, 7 Feb 2012, Jeff Kell wrote:
>
>> Quick reality check...
>>
>> Is the difference in the E-series chassis only in available power? Has
>> nothing to do
>> with backplane bandwidth?
>
> The non-E chassis only has 40G per slot to the backplane, where the E
> chassis has 80G per slot. IIRC the Sup2T and 6900-series blades will
> only work in an E chassis. I don't have any Sup2Ts or 6900s to verify that.

This is correct.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list