[c-nsp] ASR9K P router

[Dmitry Valdov]

AFAIK, ASR9K doesn't support full netflow (without sampling) even with new
cards. 
It supported by ASR1K.


On Wed, 8 Feb 2012, Dobbins, Roland wrote:

> On Feb 8, 2012, at 7:51 PM, Ghassan Khalil wrote:
>
>> - The ASR9K P routers will be directly connected to 7606 Internet Gateway Routers (IGR) for internet connectivity.
>
> The concern with 7600s is their NetFlow, uRPF, and ACL caveats - nothing to do with MPLS per se, but these are major concerns when attempting to use them as peering-/transit-edge routers.  I would recommend changing out the 7600s at the edge for ASR9Ks or some other platform which supports good NetFlow, ACLs, and uRPF at the edges.
>
> -----------------------------------------------------------------------
> Roland Dobbins <rdobbins at arbor.net> // <http://www.arbornetworks.com>
>
> 	  Luck is the residue of opportunity and design.
>
> 		       -- John Milton
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- 
Dmitry Valdov
CCIE #15379 (R&S and SP)