[c-nsp] Internet BGP autofailover

[-Hammer-]

You might also want to define what conditions prompt a failover and 
maybe tie some SLAs to that. IP SLAs that is.

-Hammer-

"I was a normal American nerd"
-Jack Herer



On 2/13/2012 8:04 AM, Tony Tauber wrote:
> You really should check the output of show commands (e.g. "show bgp
> neighbor a.b.c.d routes", etc.) both on your side and on the side of your
> ISPs to ensure everyone is accepting, installing, and redistributing the
> routes.  Then go from there.
>
> Tony
>
> On Mon, Feb 13, 2012 at 4:53 AM, alex nyagah<alex.nyagah.k at gmail.com>wrote:
>
>> Hi Group,
>> I have the following configs in my router but auto failover between two ISP
>> is not working, can someone please help..
>>
>>
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>