[c-nsp] Fibre link flapping

[Aaron]

How about using a light meter? It is possible that the connectors
maybe poor, the light on the tx interface could be marginal, etc

On Thu, Feb 16, 2012 at 17:43, Nat Morris <nat at nuqe.net> wrote:
> On 16 February 2012 22:08, Nick Hilliard <nick at foobar.org> wrote:
>> There are plenty of good protocols for cleaning fibre.  None of them
>> includes compressed air.  Get alcohol wipes, a CLETOP-S, one-click
>> cleaners, whatever.  They all work very well.  But don't use compressed air.
>
> This is a good intro into fibre cleaning;
> http://www.uknof.org.uk/uknof14/Taylor-Fibre.pdf
>
> Nat,
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/