[c-nsp] TCP port rate limit in VLAN interface on Sup720

[Lee Starnes]

Hi Phil,

Yep I had missed the mls qos vlan-based command on the port. Looks to be
working now.

Thanks,

-Lee

On Wed, Feb 22, 2012 at 1:14 AM, Phil Mayers <p.mayers at imperial.ac.uk>wrote:

> On 02/21/2012 09:02 PM, Lee Starnes wrote:
>
>> Hi Everyone,
>>
>> I did a few searches of the archives and was not able to find an answer to
>> what I'm trying to do. What we are trying to do is put a rate limit on
>> certain TCP ports for traffic on customer VLANs. I have put into place a
>> policy map that does not seem to be working. We are limiting both
>> directions. Below is what I have. Does anyone have any ideas why this
>> would
>> not work? Is there a different way of handling this?
>>
>
> Do you have all the usual bits you need, including:
>
> mls qos
> int GiX/Y
>  switchport ... vlan 555
>  ! set vlan-based on physical port
>  mls qos vlan-based
>
> What does "sh mls qos ip" say?
>